Mellarius MiniLine D40 manual 3 frame honey extractor

Tangential honey extractor for three frames with manual drive. The basket width is 25 cm, so the extractor is suitable for most frames. These extractors are designed for beginning beekeepers whose demands on the extractor are low, and therefore do not want to invest too much money in its purchase.

About Mellarius MiniLine honey extractors

Mellarius MiniLine honey extractors offer a simple extractor in high-quality stainless steel design at a favorable price. They are made from polished stainless steel sheets that are designed for food contact. The extractor can be equipped with a plastic or stainless steel outlet tap upon request.

Modern construction

Mellarius MiniLine series extractors have a modern design, with removable legs. The simple ergonomic handle allows quick spinning of the extractor basket. The drum of the extractor is made of food-grade stainless steel of sufficient thickness (0.8 to 1 mm), so that unwanted dents cannot easily occur. The entire construction of the extractors is manufactured using plasma welding. The design emphasizes smooth surfaces that are easy to clean.

The extractor baskets are made with a denser network of stainless steel wires, thanks to which the force on the honeycomb during extraction is distributed over a larger area, preventing the wires from cutting into the comb. Circular rods resistant to twisting are used to make the baskets. Circular surfaces without sharp edges are also easier to clean.

Easy disassembly

The drive system is always located in the upper part of the extractor, which provides the possibility of easy maintenance. Thanks to this solution, the extractor basket is freely placed on a ball bearing at the bottom. The drive is located on a mounting rail, which also has wide hinges for plexiglass covers. The mounting rail with the drive is sufficiently massive, again made of polished stainless steel material, for easy maintenance. After removing the upper rail with the drive, which is attached with two star screws, the entire drive can be easily removed. Just as easily, you can take out the entire basket from the extractor and can easily clean the whole extractor and basket separately.

Simple manual drive

The simple manual drive assembly with an ergonomic handle ensures quick spinning of the extractor basket. The construction with two gears in the assembly has an ideal gear ratio, so that the extractor can be easily spun. Thanks to this simple design, the entire drive of the extractor is very reliable without the need for major maintenance.

Technical parameters of the extractor

• Basket width: 25x48 cm
• Basket type: with shaft
• Height of the extractor when assembled: 58 cm
• Height of the tap from the ground: 30 cm
• Outer diameter of the drum: 40 cm
• Direction of rotation: both
• Brake: no
• Freewheel: no

The extractors are from official German distribution. Depending on warehouse availability, they are supplied with black or gray legs.