Honey extractor Mellarius MaxiLine 4 frames with 230V electric motor P43

Tangential honey extractor for four frames with electric drive 230 V with 110W power. The basket width is 24 cm, so the extractor is more suitable for extracting Langstroth frames - 39x24 frames fit with difficulty, so we do not recommend this model for extracting them. The extractor is made of polished stainless steel sheets, meeting food contact certifications. Top-tier design with conical bottom and many other innovative features.

About Mellarius MaxiLine honey extractors

The premium range of our honey extractors. Mellarius MaxiLine extractor guarantees high quality and long lifespan. These extractors are made from thicker stainless steel sheets (0.8 to 1 mm) and are equipped with massive legs that increase the stability of the extractor. Each Mellarius extractor in MaxiLine version is equipped with a sloped bottom, thanks to which honey conveniently flows to the outlet valve. It is not necessary to tilt them or manipulate them further. A wide range of manual and electric extractors in tangential or radial variants.

Modern construction

Mellarius MaxiLine extractors have a modern construction, with the possibility of leg disassembly. The drums of the extractor are made of food-grade stainless steel of sufficient thickness (0.8 to 1 mm), so that unwanted dents cannot easily occur. The entire construction of the extractors is manufactured using plasma welding. The design emphasizes smooth surfaces that are easy to clean.

The baskets of the extractors are made with a denser network of stainless steel wires, thanks to which the force on the honeycomb during extraction is distributed over a larger area, preventing the wires from cutting into the comb. Round bars resistant to twisting are used to make the baskets. Round surfaces without sharp edges are also easier to clean.

The extractors are equipped with an innovative conical bottom, into which a welded stainless steel gate valve with a shear closure is recessed at its lowest part. This ensures that all honey will always flow out of the extractor completely without residue.

The leg system is also innovative, positioned and attached to the extractor to achieve maximum stability. The legs are made of massive material and contribute to stability during extraction with their own weight. Thanks to a simple but solid connection, the legs can be easily removed, making the entire extractor much more compact for safe storage until next use.

Easy disassembly

The drive system is always located in the upper part of the extractor, which provides the possibility of easy maintenance. Thanks to this solution, the basket of the extractor is freely placed on a ball bearing in the lower part. The drive is placed on a mounting strip, which also has wide hinges for plexiglass covers. The mounting strip with the drive is sufficiently massive, again made of polished stainless steel material for easy maintenance. After removing the top strip with the drive, which is attached by two star screws, the entire drive can be easily removed. Just as easily, you can remove the entire basket from the extractor and can easily clean the entire extractor and basket separately.

Proven drive with the possibility of speed change

Maxima series extractors are equipped with a reliable electric motor with sufficient power of 110 W. These motors are equipped with their own fan for better cooling. The motor includes a robust manual system for continuous speed regulation. The transfer of motor power to the extractor basket is ensured by a mechanical gearbox for an optimal range of extraction speeds.

The motor allows for speed change and thus a change in the direction of rotation of the entire basket, which increases comfort during extraction. Bees tend to build cells at a slight upward slope (4° to 5°) - so that the stored honey does not flow out, plus honey stored this way ensures certain stability of the comb. For beekeepers, this has a disadvantage because when the honeycomb is placed in the extractor, the cells point in one direction, and if this direction is against the direction of rotation, then the honey flows out poorly and some honey reserves may remain in the combs. Therefore, it is advantageous to have an extractor with the possibility of bidirectional extraction.

Technical parameters of the extractor

• Basket width: 24x48 cm
• Basket type: classic
• Height of the extractor in assembled state: 104 cm
• Height of the extractor including drive: 120 cm
• Height of the valve from the ground: 38 cm
• Outer diameter of the drum: 40 cm
• Motor: 110W
• Regulation: continuous, manual
• Direction of rotation: both

Main advantages of the extractor

• Conical bottom with recessed valve - all honey always flows out.
• Quality stainless steel materials with polished surface.
• The baskets used have a dense grid - does not damage bee combs.
• Simple leg disassembly system - easy storage.
• Easy disassembly of the drive and basket of the extractor - convenient cleaning.
• Quality electric motor 110 W
  

The extractors are from official German distribution. According to warehouse specifications, they are supplied with black or gray legs. The 110W motor is supplied in blue, red, or white versions.