Manual foundation press - water cooled - 420 x 205 mm

Water-Cooled Foundation Press with Silicon Mold 420 × 205 mm

Manual foundation press with water cooling and silicon matrix is a practical tool for beekeepers who want to process their own wax and have full control over foundation production. Cooling is integrated in the upper part of the mold with direct water connection, thanks to which the foundation solidifies faster, pressing follows better and work proceeds at a brisk pace. Excess wax drains into an integrated tray, so valuable material doesn't end up on the table and the surroundings stay clean. The mold dimension of 420 × 205 mm suits most commonly used frame sizes. The press is supplied as a ready-to-use set including stainless steel spatula, dipper, brush and cooling hoses.

Self-Sufficiency in Wax and Greater Security for Bee Colonies

The greatest advantage is the ability to close the wax cycle in your own apiary. When producing foundation from your own wax, you have certainty of origin and material purity and minimize the risk of unwanted additives such as paraffin or stearin getting into the hives. At the same time, you also reduce the probability of introducing diseases from purchased foundation (e.g. American foulbrood). In practice, this means more stable colonies, better comb building and savings on costs for ready-made foundation.

Silicon Matrix for Precise Cell Imprint and Easy Release

Quality silicon matrix creates a sharp and deep cell relief that bees readily build upon during construction. Non-stick silicon also facilitates separation of the foundation after brief cooling – wax doesn't stick to the mold, foundation releases better and cracks less during handling. Thanks to this, work is faster and comfortable even for less experienced beekeepers.

Technical Parameters