Sheet metal roof for Dadant US - 10 frames

Dadant US hive roof from sheet metal. Roof is without thermal insulation! We can made any size, please contact us.

Hive box 3/4 (185 mm) Dadant US - 10 frames - decompose

Hive box for beehive Dadant US in size for 3/4 frames with milled handle.

Hive box Jumbo (285 mm) Dadant US - 10 frames - decompose

Hive box for beehive Dadant US in size for Jumbo 285 mm frames with milled handle.

Bottom with stainless steel metal wire mesh for Dadant US - 10 frames

High bottom (openable back cover) for Dadant US in 10 frames variant, means you do not have to disassemble the hive to clean the drawer.

Bottom board slider 462 x 462 mm

Heat-resistant, food-safe and with 5 x 5 cm Varroa counting grid
Dimensions approx. 462 x 462 mm

Stainless steel solar wax melter with strainer for 2 frames

Polycarbonate solar melter will make it easier for you to work with frames and molds you want to paint. The melter is intended for easy processing of the beeswax. On a sunny day, we simply remove the melter into a sunny place, turn it towards the sun, and place it under a slight angle so that the wax flows a lot into the cabinet.

Bee Escape Board with 8 Exits

Through the use of bee escapes between the honey and brood chamber, the intermediate floor can be used as a honey removal board.

Hive box Dadant US - 12 R. - t.1 - 141 - schienen - disassembled

Hive box with stainless steel rails - disassembled, for 12 Dadant US frames, low frame extension with dimensions of 482 x 448 x 141 mm.

Entrance reducer - diam. 6.8 cm - red

Circular entrance gate with a diameter of 68 mm. It also serves to close the passage for bees and queen. Option for larger or smaller passage or just as a ventilation hole.

Entrance reducer - diameter 6.8 cm - stainless steel

Circular entrance gate with a diameter of 68 mm. It also serves to close the passage for bees and queen. Option for larger or smaller passage or just as a ventilation hole.

Stainless steel grafting tool for queen larvae - left

Stainless steel grafting tool for queen larvae, for the coloring of future queen to queen cell, Metal grafting tool with stainless steel needle.

Stainless steel cover 530x530x60 mm - Dadant US 12 frame hive

Practical lid in size 530x530x70 mm for Dadant US 12 frame hives, made of stainless steel sheet type 201.

Drawer for varroa bottom board 435 x 410 mm

Made from light-colored plastic, UV stable and heat-resistant material. With a molded grid with 5 x 5 cm cells. Dimensions approximately 435 x 410 mm

Wooden hive Dadant US for 12 frames - 1x 285 2x 159

Wooden hive Dadant US for 12 frames - 1x 285 3x 159

The set includes a low or high varroadno. One Dadant US extension for 12 frames with a height of 285 for frames with a top of 482 mm with stainless steel rails. It also includes 3 extensions with a height of 159 for 12 frames with a top of 482 and a height of 159 mm with stainless steel rails.

Stainless steel support rail (schienen) Liebig Zander - 376 mm

Length approximately 376 mm

Pad for Varroa bottom Liebig Zander

Suitable for bottom board: product code 1431.
Made of light-colored plastic, UV stable heat-resistant material.
With a 5 x 5 cm grid for convenient monitoring of Varroa mites.
Dimensions approximately 475 x 380 mm, with the possibility of trimming.

Stainless steel frame runners for Dadant US 12 frames

Dimensions approx: 460 x 20 mm

Plastic pad for bottom 420 x 382 mm

made of light-colored plastic, stable and boil-proof, gridded with 5 x 5 cm Varroa counting squares, dimensions approx. 420 x 382 mm

Flexible propolis trap - 478x378 mm

10-frame Liebig DN Compact Hive Plastic Round Excluder Yellow

For placing on the frames, 420 x 377 mm, 3 mm thick

10-frame Liebig DN Compact Hive Propolis Screen

Plastic feeder Liebig size - 7 l

Made from a single piece of plastic with a plastic insert.
The feeder is also suitable for Langstroth hives.
Capacity 7 liters, weight approx. 1.5 kg.
Dimensions approx: 43 x 51 cm, height approx. 6 cm.

Feeder for Zander Liebig 8 l

Suitable for hives of Liebig Zander 10 frame and Liebig DNM 12 frame construction. Made of 2 mm thick plastic with an angled cover and aluminum sheet to be placed on the fold of the feeder.

High varroa bottom board Dadant US - 12 frames

Tall fully-screened bottom board with a ventilation grid made of galvanized steel.
Closable entrance reducer that prevents mice from entering.

Varroa bottom board Dadant US - 12 R - Pfefferle

Stainless steel ventilation grid in a wooden frame and a removable tray for debris.
Insertable cassette, can be used variably from the back, top, or bottom.

25 kg honey tank Mellarius MaxiLine with sloping bottom and sealing lid

German stainless steel honey tank for 25 kg of honey with stainless steel honey gate and
sealing stainless steel roof. This honey tank have innovated sloping bottom - all
the honey will simply flow out.

35 kg honey tank Mellarius MaxiLine with sloping bottom and sealing lid

German stainless steel honey tank for 35 kg of honey with stainless steel honey gate and
sealing stainless steel roof. This honey tank have innovated sloping bottom - all
the honey will simply flow out.