Extractors

Radial honey extractor, Ø1000mm, electric drive, automatic, CLASSIC

Radial honey extractors are characterized by the possibility of placing a large number of frames in the basket of honey extractor. The way the frames are arranged in a radial system causes that the centrifugation can take place in one direction. Radial honey extractors are recommended for large apiaries that have 1 or 2 frame types.

Medomet Lysoň Basic 4 frame manually reversible electric 230V P60

The 4-frame honey extractor is the basic version of the device used for extracting honey. This version is equipped with an electric drive. The manual controller is simple and intuitive to use – a convenient knob is used to increase / decrease the revolutions.

Replacement hand crank Swiss Biene

Manual drive for honeycombs from Swiss Biene. Replacement manual drive, which is suitable for Swiss Biene honeycombs with a drum diameter of 64 cm.

12V 250W Lyson Transformer

It is used for 12V extractors (650-720mm diameter) or also for sticking wax
to the frames¨. Feeder is 230V with possibility to switch to 110V (USA), 12V
output, Power 250W, Electric current 21A

Red band sieve

Red band sieve for honey extraction from uncapped caps. Fill up sieve and hang it to honey extractor. Please use two sieves at once for better balance.

Stainless Steel Cleaner ApiDana® - 250 ml

Protective cover for honey extractors P50-56

Protective cover for honey extractors P60-66

Mellarius MaxiLine D45 electric 4 frame honey extractor

Mellarius MaxiLine D52 electric 4 frame honey extractor with german cage

Mellarius OptiLine D40 manual 3 frame honey extractor with legs

A good stainless steel honey extractor for all "beginner beekeepers" who would like to have their own honey extractor but do not want to spend a lot of money on it. The Honey Extractor is all made of stainless steel, designed for three frames up to a maximum size of 25x46 cm.

Honey extractor Mellarius MaxiLine 4 f. manual with large crank without shaft P64

Mellarius MaxiLine D52 electric 3 frame honey extractor

Mellarius MaxiLine D52 electric 3/9 N frame honey extractor

Mellarius MiniLine D40 manual 3 frame honey extractor with container

Mellarius OptiLine D40 manual 2 frame honey extractor with container

A good stainless steel honey extractor for all "beginner beekeepers" who would like to have their own honey extractor but do not want to spend a lot of money on it. The Honey Extractor is all made of stainless steel, designed for two frames up to a maximum size of 34x48 cm.

Honey extractor with container Mellarius OptiLine 3 frames with 230V electric drive P52

Tangential honey extractor for three frames with its own container and strainer. The basket width is 34 cm, so the extractor is suitable for most frames or two shallow supers. The advantage of this solution is the integrated strainer and container, where in one device you get everything needed for extracting, straining, and collecting honey.

Honey extractor with container Mellarius OptiLine 4 frames with 230V electric motor P52

Tangential honey extractor for four frames with its own container and strainer. The basket width is 29 cm, so the extractor is suitable for most frames. The advantage of this solution is the integrated strainer and container, where in one device you get everything needed for extracting, straining, and collecting honey.

Honey Extractor with Container Mellarius OptiLine 5/10 r. with 230V Electric Motor P52

Tangential honey extractor for five frames (or radial for ten frames) with electric drive, with its own container and strainer. The basket width is 26 cm, so the extractor is suitable for most frames. The advantage of this solution is the integrated strainer and container, where in one device you get everything needed for extracting, straining, and collecting honey.

Honey extractor with container Mellarius OptiLine 3 frames manual P52

Tangential honey extractor for three frames with its own container and strainer. The basket width is 34 cm, so the extractor is suitable for most frames or two shallow supers. The advantage of this solution is the integrated strainer and container, where in one device you get everything needed for extracting, straining, and collecting honey.

Honey extractor with container Mellarius OptiLine 4 frames manual P52

Tangential honey extractor for four frames with its own container and strainer. The basket width is 29 cm, so the extractor is suitable for most frames. The advantage of this solution is the integrated strainer and container, where in one device you get everything needed for extracting, straining, and collecting honey.

Honey extractor with container Mellarius OptiLine 5/10 manual P52

Tangential honey extractor for five frames (or radial for ten frames) with its own container and strainer. The extractor is firmly connected to the container using clamps. Between the extractor and container is a large strainer with a diameter of 52 cm. The basket width is 26 cm, so the extractor is suitable for most frames. The advantage of this solution is the integrated strainer and container, where in one device you get everything needed for extracting, straining, and collecting honey.

Electric 4 frame honey extractor with two gate Ø 64 cm - Swiss Biene

A good stainless steel honey extractor with two honey gates for all beekeepers who would like quality electric honey extractor. 230 V engine with reversible operation. The Honey Extractor is all made of stainless steel, designed for two frames up to a maximum size of 33x46 cm. Simple crank with gear facilitates spin. The diameter is 64 cm and the height of the honey extractor is 115 cm.

Honey Extractor Lysoň Basic 6 frames electric 230V P65

Tangential honey extractor for 6 frames. Drum 65 cm, for frames with max. dimensions 44.8 x 27 cm.

Protective cover for honey extractors P80-86